User Manual Q&AAnswer
Jan 30, 2025 - 02:47 AM
To adjust the tightness of the running belt on the CITYSPORTS CS-WP3 Fitness Walker, follow these steps:
1. Use a 5 mm hexagonal wrench to locate the adjusting xxxx on the left side of the belt.
2. Turn the wrench 1/4 times clockwise to tighten the rear drum and tighten the belt.
3. Repeat step 1 for the adjusting xxxx on the right side of the belt.
4. Turn the wrench 1/4 times clockwise to tighten the rear drum and tighten the belt.
5. Repeat steps 1 and 2 until the running belt does not slip.
Note: Do not over tighten the running belt as it can cause damage. The belt should not be adjusted too tightly. If the running belt is still not centered, follow the instructions in the manual to adjust the center position of the belt.
Please refer to the "Adjusting the Running Belt" section in the manual for more detailed instructions and illustrations.
Add New Comment