User Manual Q&AAnswer
Jan 30, 2025 - 02:12 AM
To assemble the Ardes AR4C06 Convector Heater, turn the appliance over and rest the plastic supports in place, matching the holes with those on the appliance. Then fix the supports with the 2 screws provided.
To use the heater, make sure the function switch is in the OFF position before connecting or disconnecting the appliance. Plug the appliance into a power outlet and set the function switch to the desired position. Turn the temperature switch clockwise to the maximum position. Once the desired room temperature is reached, turn the handle slowly in a counter-clockwise direction until the appliance is turned off. The heater will automatically restart when the temperature in the room goes below the set limit.
Before storing the appliance, make sure it has cooled sufficiently.
For more details and safety instructions, please refer to the Ardes AR4C06 Convector Heater Instruction Manual.
Add New Comment