How do I install the BERTAZZONI KPH36XT Wall-Mounted Chimney Hood? (BERTAZZONI KPH36XT Wall-Mounted Chimney Hood User Manual)

Answer

manuals.plus

Jan 30, 2025 - 02:07 AM

Sure! Here are the step-by-step installation instructions for the BERTAZZONI KPH36XT Wall-Mounted Chimney Hood:

1. Before installation, make sure to read and understand all the safety instructions in the user manual.

2. Determine the location where you want to install the chimney hood. It should be at least 26 inches above an electric cooker stove or 30 inches above a gas or combined cooker stove.

3. Drill holes in the wall according to the distances indicated in the manual. Use screws and xxxx anchors suitable for the type of wall you are working with.

4. Fix the appliance to the wall and align it horizontally with the wall units. Once aligned, securely fasten the hood using the provided screws.

5. If you are using a decorative telescopic flue, install the upper decorative flue's support bracket on the wall using the provided screws. Connect the flange to the air extraction hole using an air extraction pipe.

6. If you are using the ducting version, prepare the air exhaust opening and connect the air exhaust tube with the same diameter as the air exhaust outlet hole.

7. If you want to convert the hood from a ducting version to a filtering version, ask your dealer for the charcoal filters and follow the installation instructions provided.

8. Once the installation is complete, make sure to remove the anti-grease filter(s) for easier handling.

Please note that these are general installation instructions. It is always recommended to refer to the user manual specific to your model for detailed instructions and safety guidelines.