User Manual Q&AAnswer
Jan 30, 2025 - 01:59 AM
To install the AVG FLORIDA-AVF-306PS Built-In Hood, follow these steps:
1. Position the hood at a distance of 71 to 76.2 cm (28-30'') from the cooking surface.
2. Drill a hole in the cabinet measuring 28 ¼'' X 10 ¾'' (730 X 275mm) with an edge width of 1.4'' (35mm) for support.
3. Open the panel and remove the aluminum filters.
4. Insert the hood into the cabinet, pushing the clip on the exterior side of the hood and tightening the screws clockwise to secure it in position.
5. Install the exhaust duct on the outlet and direct it outside.
For more detailed instructions and illustrations, refer to the "Installation Procedures" section of the user manual.
Please note that it is recommended to have the installation done by a qualified technician to ensure safety and adherence to all applicable codes and standards.
Add New Comment