User Manual Q&AAnswer
Jan 30, 2025 - 01:55 AM
To install the CM4 module on the BIGTREETECH PI4B Adapter V1.0, follow these steps:
1. Make sure the power is off before performing any unplugging or plugging operations.
2. Orient the CM4 module correctly and align the connectors on the module with the corresponding connectors on the adapter board.
3. Gently insert the CM4 module into the socket on the adapter board, ensuring that it is fully seated.
4. Once the module is securely inserted, you can power on the system.
Please refer to the "CM4 Installation" section in the user manual for visual instructions and additional details.
Note: It is important to handle the board gently to prevent any damage during the installation process.
Add New Comment