User Manual Q&AAnswer
Jan 30, 2025 - 01:54 AM
To switch between the connected computers using the TRIPP-LITE B002-DP2A2-N4 Secure KVM Switch, you can use the pushbutton port selection method. The switch has two buttons on the front panel, labeled "1" and "2", corresponding to the two connected computers. Here's how you can switch between the computers:
1. Ensure that both computers and the switch are powered on and properly connected.
2. Press the desired button (1 or 2) on the front panel of the switch to select the corresponding computer.
3. The switch will change the display and input control to the selected computer.
Please note that the TRIPP-LITE B002-DP2A2-N4 Secure KVM Switch does not support other port-switching methods, such as on-screen display (OSD) or hotkey commands. Therefore, you should use the pushbutton port selection method to switch between the connected computers.
Add New Comment