User Manual Q&AAnswer
Jan 30, 2025 - 01:51 AM
To select the appropriate curing time on the Molly Lac D9 MollyLux UV-LED Lamp, follow these steps:
1. Connect the lamp to the power supply.
2. Press the timer button on the lamp.
3. The timer display will show the available timer options: 10s, 30s, 60s, and 99s (99s is the painless mode).
4. Press the timer button repeatedly to cycle through the available options.
5. Stop pressing the timer button when the desired curing time is displayed.
6. The lamp will automatically start the curing process for the selected time duration.
If you prefer to start the curing process without selecting a specific time, simply insert your hand into the device, and the illumination will start automatically when movement is detected by the infrared sensor. The maximum curing time when using the sensor is 120 seconds.
Note: If you want to use the painless mode, press the timer button until the display shows "99s." In this mode, the irradiation power gradually increases for a more comfortable curing experience.
Always follow the curing instructions provided with the gel or hybrid products you are using to ensure proper curing. After you have finished using the lamp, remember to unplug it from the mains supply.
Add New Comment