Answer
![manuals.plus](https://data3.answerbase.com/answerbase/15673/UserFiles/User3627018/profileImage3627018.jpg?638365818380000000)
Jan 30, 2025 - 01:49 AM
To install the Q CELLS Q.MAXX-G4 Solar Module Series, please follow these guidelines:
1. Choose a suitable installation site:
- Avoid explosive environments and highly flammable gas or vapors.
- Do not install modules in enclosed spaces or locations prone to water submersion.
- Modules should not be used as a substitute for normal roofing.
- Avoid installing modules near air conditioning systems.
- Do not install modules above 4000m (13120ft) altitude.
- Prevent contact with saline water and salt aggregation.
2. Use a proper mounting structure:
- The mounting structure should comply with structural requirements and local snow and wind loads.
- Ensure the modules are properly fastened to the ground, roof, or facade.
- The mounting structure should relay forces acting on the module and allow for expansion and contraction due to temperature fluctuations.
- Avoid contact corrosion by using compatible metals.
3. Select an appropriate clamp system:
- Use clamps with a width of at least 40mm and a height compatible with the module's 32mm frame height.
- The clamps should not be in contact with the front glass or deform the frame.
- Choose long-term stable clamps that securely affix the module to the mounting frame.
4. Determine the module orientation:
- Vertical or horizontal installation is permitted.
- Ensure rain and melting snow can run off freely without water accumulation.
- Do not cover the drainage holes in the frame.
5. Follow the recommended mounting options:
- Refer to the provided installation options diagram and table for specific details on clamp positions, test loads, and design loads.
- Consider the requirements and limitations for each mounting option.
6. Ensure proper electrical layout:
- Avoid mismatches of specified electric current (IMPP) of more than 5% for modules connected in series.
- Use a safety factor of 1.25 for voltage and current measurements, as well as control system sizing.
- Follow national guidelines and safety regulations for electrical installations.
Please refer to the complete Q CELLS Q.MAXX-G4 Solar Module Series User Manual for more detailed instructions and safety precautions.
Add New Comment![Sending...](https://manuals.answerbase.com/images/loading-boxes.gif)