User Manual Q&AAnswer
Jan 30, 2025 - 01:09 AM
To adjust the temperature on the GNB LAB AX-100 Lovewax Wax Warmer, follow these steps:
1. Switch on the warmer by connecting it to the power supply.
2. Set the temperature setting xxxx to the MAX position until the wax has melted. This process usually takes about 15 minutes. To speed up the melting process, you can put the lid on the warmer. Remember, the higher the temperature setting, the faster the wax will melt.
3. Once the wax has melted, reduce the temperature by turning the temperature setting xxxx to the MED position. If necessary, further adjust the temperature to ensure it does not burn the skin.
4. It is important to check the temperature of the wax before applying it to the skin. Adjust the temperature as needed. The wax should not be too hot or too cold.
5. Proceed with your treatment using the wax at the desired temperature.
6. After completing the treatment, remove the wax can from the unit, switch off the warmer, and cover it with the lid.
7. When cleaning the appliance, make sure it is switched off and slightly warm. You can use a special cleaning agent for this purpose.
Please note that it is crucial to check the user manual for specific instructions and safety precautions before using the GNB LAB AX-100 Lovewax Wax Warmer.
Add New Comment