User Manual Q&AAnswer
Jan 30, 2025 - 01:05 AM
To adjust the temperature on the GNB LAB AX-700 Lovewax Wax Warmer, follow these steps:
1. Connect the appliance to the power supply.
2. Remove the plastic lid from the warmer.
3. Switch on the heater and set the temperature unit (°C or °F) using the controls on the device.
4. Set the desired temperature until the wax melts. The temperature range is 0-120°C (32-248°F).
5. To speed up the melting process, you can put the lid on the warmer. The higher the temperature of the wax, the faster it will melt.
6. Once the wax has melted, reduce the temperature to a lower setting to ensure it does not burn the skin. It is important to check the temperature of the wax before applying it, adjusting the temperature if necessary. The wax should not be too hot or too cold.
7. Proceed with the treatment.
Note: It is recommended to refer to the instruction manual for specific details on temperature adjustment and usage guidelines.
Add New Comment