Answer
Jan 30, 2025 - 12:22 AM
To install the WiZ CRC000 ELPAS LED Wall Light, please follow the provided installation instructions:
1. Power off: Before starting the installation, make sure to turn off the power supply to the area where you will be installing the wall light.
2. Wiring: Carefully connect the wiring according to the electrical code and regulations in your area. The specific wiring instructions may vary depending on your electrical setup, so it is recommended to consult a qualified electrician if you are unsure.
3. Power on: Once the wiring is properly connected, you can turn on the power supply to the area. The wall light should now be ready to use.
Please note that it is important to follow all safety precautions and guidelines provided in the instruction manual to ensure a safe and proper installation. If you have any specific questions or concerns regarding the installation process, it is recommended to refer to the detailed installation instructions provided in the manual or contact the manufacturer's customer support for assistance.
Add New Comment