User Manual Q&AAnswer
Jan 30, 2025 - 12:21 AM
To install and set up the ewell AW-DS-S1 Bluetooth Beacon, please follow these steps:
1. Open the packaging and check that you have all the necessary items, including the Bluetooth beacon, No.5 batteries (2), 3M glue, user's manual, and certificate.
2. Take out the Bluetooth beacon and the No.5 batteries. Ensure that the batteries are installed correctly, with the positive and negative terminals aligned properly.
3. Apply the 3M glue to the back of the Bluetooth beacon.
4. Choose a suitable location for the Bluetooth beacon and firmly press it against the desired surface, ensuring it is securely attached.
5. Once the Bluetooth beacon is installed, you can configure its parameters. Refer to the user's manual for detailed instructions on how to configure the parameters according to your specific requirements.
6. The Bluetooth beacon is now ready to use. It will periodically broadcast Bluetooth beacons to the surrounding environment for applications such as indoor positioning, indoor navigation, exhibition navigation, patrol, and clock-in.
If you encounter any issues during installation or setup, please refer to the common troubleshooting section in the user's manual for possible solutions. If the issue persists, you can contact the manufacturer's customer support for further assistance.
Add New Comment