User Manual Q&AAnswer
Jan 30, 2025 - 12:19 AM
To install the Ustellar NTF90 60W Smart Black Light, please follow these steps:
Step A: Determine the spacing of the two xxxx bits on the bracket and drill two corresponding holes on the mounting panel.
Step B: Align the bracket with the drilled holes and secure it in place using two bolts.
Step C: Adjust the lighting direction as needed and plug in the light to power it on.
Step D: Remove the plastic sheet from the bottom of the remote controller to activate it.
Please note that the distance between the light and the object being illuminated should be more than 1 meter to avoid high temperatures caused by a short distance.
For more detailed instructions and illustrations, please refer to the user guide provided with the product.
Add New Comment