User Manual Q&AAnswer
Jan 29, 2025 - 11:58 PM
To install the HP 3YM58AN 67XL Tri-color High-yield Ink Cartridge in your printer, please follow these steps:
1. Press the Power button to turn on the printer.
2. Open the cartridge access door. The carriage will move to the center of the printer. Wait until the carriage is idle and silent before continuing.
3. Press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.
4. Remove any clear protective tape that might be on the nozzles of the cartridge.
5. Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot.
6. Push the cartridge forward into its slot until it snaps into place.
7. Repeat these steps for the other cartridge, if necessary.
8. Close the cartridge access door.
9. Try to print again.
Please note that these steps are a general guideline. For specific instructions and illustrations, please refer to the user manual provided with the ink cartridge.
Add New Comment