User Manual Q&AAnswer
Jan 29, 2025 - 11:46 PM
To install the DAVIS LIGHTING Excalibur EX Extrusion Polycarbonate Diffuser, follow these steps:
1. Prior to installation, read all instructions and inspect the luminaire and associated parts for any signs of defect. Do not install the luminaire if it appears faulty.
2. Before commencing installation, turn off and isolate the electrical supply. Electronic control equipment must not be subjected to high voltages.
3. For wall mount installation, install the mounting base on the wall according to the measurement. Then, xxxx the luminaire onto the mounting base.
4. For pendant mount installation, xxxx the mounting base on the ceiling accordingly. Tighten the cap on the mounting base. Attach the hanging cable by screwing it onto the luminaire. Adjust the height accordingly. Combine the luminaires to extend if needed. Cut off the extra cable and put on the top cover.
5. For ceiling mount installation, install the mounting base on the ceiling according to the measurement. Attach the luminaire to the mounting base by clipping it in.
6. For recessed mount installation, insert the luminaire into the hole that was prepared. Tighten it until it clamps to the ceiling. Put on the cover.
7. Connect the mains to the terminal block.
8. Turn on the main supply.
Please note that unauthorized modification and improper installation void the product warranty. It is recommended to follow the dimensions and maintenance instructions provided in the manual. If you have any further questions or concerns, you can contact DAVIS LIGHTING through their respective head offices and sales offices listed in the manual.
Add New Comment