User Manual Q&AAnswer
Jan 29, 2025 - 11:43 PM
To install the ALATECH SC003 Magnet Less Cycling Speed and Cadence Sensor, follow these steps:
1. For Speed Sensor Installation:
a. Select the smallest size hub rubber O-ring that securely fits your wheel hub.
b. Place the sensor on the hub rubber pad with the logo facing up, holding them on top of the wheel hub.
c. Pull the hub rubber O-ring around the wheel hub and attach it to the hook on both sides of the sensor.
d. Rotate the wheel to ensure the sensor does not move and does not touch other parts of your bike.
2. For Cadence Sensor Installation:
a. Place the sensor on the crank rubber pad with the logo facing up, holding them on the non-drive side crank arm.
b. Pull the crank rubber O-ring around the crank arm and attach it to the hook on both sides of the sensor.
c. Rotate the crank arm to ensure the sensor does not move and does not touch any part of your shoe or bike.
Please refer to the user guide for visual illustrations and additional information on the installation process.
Note: If the sensor is installed on the crank, it will be automatically set as the cadence sensor. If installed on the wheel hub, it is automatically set as the speed sensor.
Add New Comment