User Manual Q&AAnswer
Jan 29, 2025 - 11:34 PM
To clean the reusable cloth filter of the Armor All AA255 Wet-Dry Utility Shop Vacuum, follow these steps:
1. Verify that the power cord is disconnected from the outlet.
2. Remove the power head and place it in an upside-down position.
3. Carefully remove the reusable cloth filter from the filter cage.
4. Clean the filter by gently tapping or brushing dirt off. Cleaning should not be done indoors in living areas.
5. Use a mild soap and water solution to wash the reusable cloth filter and rinse with clean water.
6. Allow the wet filter to air dry for 24 hours before installing it onto the filter cage.
It is important to clean or change the dust filter regularly for best performance. Always use the dust filter for dry vacuuming. If the machine is used without the dust filter, the motor may burn out and the warranty will be voided. Handle the filter carefully when removing it for cleaning and replacing it. Check the filters for tears or small holes. If there are any holes or tears, do not use the filter and replace it immediately.
For more detailed instructions and illustrations, please refer to the "Installing & Cleaning Reusable Cloth Filter" section in the Armor All AA255 2 Peak HP Wet-Dry Utility Shop Vacuum Operation Manual.
Add New Comment