User Manual Q&AAnswer
Jan 29, 2025 - 11:14 PM
Installing the PANGTON VILLA RGB LED Light Strip with Remote is a straightforward process. Here are the step-by-step instructions:
1. Clean the wall or surface where you plan to install the LED light strip to ensure it is free from dust and adhesives.
2. Install the buckle fittings that are provided with the light strip. These buckles will help secure the strip in place. The recommended distance between each buckle is 1 meter or 3.2 feet.
3. Peel off the backing of the LED light strip to expose the adhesive side.
4. Press the adhesive side of the LED light strip firmly against the wall or surface, making sure it is aligned with the buckles.
5. Repeat the process until you have installed the desired length of the LED light strip.
Please note that the PANGTON VILLA RGB LED Light Strip with Remote is not waterproof, so it should only be used indoors.
For more detailed instructions and illustrations, please refer to the user manual provided with the product.
If you have any further questions or need assistance, please consult the user manual or contact PANGTON VILLA customer support.
Add New Comment