User Manual Q&AAnswer
Jan 29, 2025 - 11:13 PM
To install the Vicseed CTEZ11 Easy Clip Car Mount, you have two options:
Method 1 - Use with the suction cup:
1. Unscrew the fixed nut completely and let the ball joint pass through the fixed nut, ensuring that the thread faces the groove. Push the ball joint firmly into the groove on the back of the car mount.
2. Tighten the fixed nut.
3. Choose a flat surface on the dashboard, clean it with a wet cloth, and let it dry. Then, install the dashboard pad by tearing off the red protective sticker and sticking the pad to the desired position. Press it firmly for 1 minute and let it sit for 24 hours before installing the car mount.
4. Attach the suction cup to the windshield or dashboard and press the suction cup lock to the bottom position to secure the car mount.
5. Adjust the angle of the car mount to fit your view.
6. Slide and clamp the U stabilizer onto the gooseneck tube to secure it.
7. Remove the protective film of the U stabilizer and press it onto the dashboard.
Method 2 - Use with the Air Vent Clip:
1. Unscrew the fixed nut completely and let the ball joint pass through the fixed nut, ensuring that the thread faces the groove. Push the ball joint firmly into the groove on the back of the car mount.
2. Tighten the fixed nut.
3. Twist the locking handle to adjust the opening of the clip to fit the air vent.
4. Insert the car mount into a suitable place on the air vent and tighten the locking handle to secure it firmly. Adjust the angle of the car mount to fit your view.
Please refer to the user manual for detailed illustrations and instructions on the installation process.
Add New Comment