User Manual Q&AAnswer
Jan 29, 2025 - 11:10 PM
To charge the battery of the FLUKE ii900 Acoustic Imaging Camera, follow these steps:
1. Connect the AC power supply to the AC wall outlet and connect the DC output to the charger base.
2. Put one or two batteries into the bay of the charger base.
3. The battery will start charging automatically.
4. To check the battery charge level, push the test button on the battery. The LED indicators on the battery will light up to show the battery charge level. If all four LEDs are on, the battery is fully charged.
5. Once the battery is fully charged, remove it from the charger base.
It is important to note the following safety precautions when charging the battery:
- Do not put the battery near heat or fire.
- Do not put the battery in direct sunlight.
- Do not disassemble or crush the battery.
- Remove the battery if it is not used for an extended period to prevent battery leakage and damage to the camera.
- Use only Fluke approved power adapters to charge the battery.
- Keep the battery clean and dry. Clean dirty connectors with a dry, clean cloth.
For more detailed information and safety instructions, please refer to the FLUKE ii900 Acoustic Imaging Camera user manual.
Add New Comment