How do I adjust the temperature and speed settings on the ClimaRad Vita H1C device? (ClimaRad Vita H1C Device Instruction Guide)

Answer

manuals.plus

Jan 29, 2025 - 10:55 PM


To adjust the temperature and speed settings on the ClimaRad Vita H1C device, you can use the control panel located on the top of the device. Here's how:

1. Temperature Control:
- Press the AUTO button to enable automatic control of ventilation, heating, and cooling based on CO measurement.
- Use the AUTO + or AUTO - button combinations to set the desired default temperature of your room. This will temporarily disable the automatic control.
- After a period of 4 hours, the ClimaRad Vita H1C will switch back to automatic control.

2. Speed Control:
- You can adjust the desired speed for heating or cooling with the + and - buttons on the control panel.

3. Other Function Keys:
- Pause: Use this function when you temporarily do not wish to ventilate/heat/cool. After 4 hours, the ClimaRad Vita H1C will switch back to automatic control.
- Maximum: This function sets the ClimaRad Vita H1C to the maximum setting. It can be used for ventilation to expel unpleasant odors. After 4 hours, it will switch back to automatic control.
- Ventilation with cooler outside air: This function allows the ClimaRad Vita H1C to ventilate with cooler outside air when it is at least 2 degrees colder than the air in your room. After 8 hours, it will switch back to automatic control. You can control the speed with the + and - buttons.
- Child lock: This button combination locks the control panel. Press the indicated buttons simultaneously for 4 seconds. Repeat the action to unlock the control panel.

If you encounter any error messages or issues, such as a dirty filter or a fault, please refer to the manual or contact your installer or housing corporation for assistance.

Please note that the above information is based on the provided manual for the ClimaRad Vita H1C device. For more detailed instructions or specific troubleshooting, it is recommended to refer to the manual or contact the manufacturer directly.