User Manual Q&AAnswer
Jan 29, 2025 - 10:45 PM
To sync the FUT A Series RF LED Controller with the hand-held remote control, please follow the steps below:
1. Ensure that the LED controller is connected to the power supply and the LED lights.
2. Make sure that the hand-held remote control has batteries installed and is within the transmission range of the LED controller.
3. Press and hold the "Sync" button on the hand-held remote control for about 5 seconds until the LED lights on the controller start flashing.
4. Within 3 seconds of the LED lights flashing, press any button on the hand-held remote control to sync it with the LED controller.
5. The LED lights on the controller will stop flashing, indicating that the sync process is complete.
6. Test the remote control by pressing various buttons to control the LED lights.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the FUT A Series RF LED Controller.
Add New Comment