User Manual Q&AAnswer
Jan 29, 2025 - 10:43 PM
To install the EnvioLite 3F10NV57-48 3 Head LED Floodlight, follow these steps:
1. Turn off the main power at the circuit breaker before starting the installation to prevent electrical shock.
2. Remove all protective plastic film covering from the fixture before installation.
3. Gather the necessary tools for installation, including a Phillips screwdriver and pliers.
4. Ensure you have the included hardware, which consists of 3 wire nuts, 2 machine screws, and 1 mounting bracket.
5. Thread the screws into the provided holes of the mounting bracket and xxxx the mounting bracket into the outlet box.
6. Pull the power supply wires out from the outlet box. Connect the fixture ground wire and the supply ground wire together using a wire nut. Attach the white supply wire to the white fixture wire and the black supply wire to the black fixture wire using wire nuts. Use cable ties below each wire nut for a secure connection.
7. Carefully tuck all the wires and wire connections into the outlet box.
8. Place the fixture pan over the mounting bracket. Insert the mounting screws at the top of the fixture pan into the oblong slots on the top of the mounting bracket.
9. xxxx in the screws into the front of the fixture pan to secure the fixture. Thread slowly to ensure the screws engage properly.
10. Each head can be positioned in multiple directions using the adjustment xxxx for vertical position and the lock nut for horizontal position. Make sure to secure all locknuts and adjustment screws tightly after final adjustments to prevent water entry.
11. Apply silicone caulking (not included) around the perimeter of the fixture back where it contacts the mounting surface for a moisture seal.
If you have any further questions, encounter problems, or need assistance with missing parts, you can contact the Customer Service line at (855) 573-6156 from 8 AM to 6 PM EST, Monday-Friday.
Add New Comment