User Manual Q&AAnswer
Jan 29, 2025 - 10:40 PM
To install the Kimex 031-1035 Camera Shelf, please follow the steps outlined in the installation guide provided with the product. Here is a step-by-step guide:
1. Start by gathering all the necessary tools and parts listed in the part list section of the installation guide. Make sure you have everything before starting the installation process.
2. Determine the desired location for the camera shelf. Ensure that it is a suitable location that provides a clear view and proper support for the camera.
3. Measure and mark the desired height for the camera shelf on the wall. Use a level to ensure the markings are straight and aligned.
4. Using a drill and appropriate drill bit, create pilot holes at the marked locations on the wall. The size of the drill bit should match the size of the wall anchors provided in the part list.
5. Insert the wall anchors into the pilot holes. Ensure they are fully inserted and flush with the wall.
6. Align the camera shelf brackets with the wall anchors and secure them in place using the screws provided in the part list. Tighten the screws firmly, but be careful not to overtighten and damage the brackets or wall.
7. Once the brackets are securely attached to the wall, place the camera shelf onto the brackets. Ensure it is properly aligned and level.
8. Secure the camera shelf to the brackets using the screws provided in the part list. Again, tighten the screws firmly but avoid overtightening.
9. Double-check the stability and levelness of the camera shelf. Make any necessary adjustments to ensure it is securely in place.
10. Finally, test the camera shelf by placing the camera onto it and adjusting the angle as needed. Ensure that the camera is stable and properly positioned.
Please note that this is a general guide, and it is essential to refer to the specific instructions provided in the Kimex 031-1035 Camera Shelf Installation Guide for accurate and detailed installation steps.
Add New Comment