User Manual Q&AAnswer
Jan 29, 2025 - 10:34 PM
Sure! Here are the step-by-step instructions on how to install the HP 3YP29AN 67 Black and Tri-Colour Original Ink Cartridges in your printer:
1. Press the Power button to turn on the printer.
2. Open the cartridge access door. The carriage will move to the center of the printer. Wait until the carriage is idle and silent before proceeding.
3. Press down on the cartridge you want to replace to release it, and then pull the cartridge out to remove it from its slot. Be careful not to touch the copper-colored contacts or the ink nozzles.
4. Remove any clear protective tape that might be on the nozzles of the new cartridge.
5. Hold the new cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its slot. Make sure that the icon on the cartridge matches the icon on the slot.
6. Push the cartridge forward into its slot until it snaps into place.
7. Repeat the above steps for the other cartridge, if necessary.
8. Close the cartridge access door.
9. Try to print again.
If you encounter any issues or have further questions, please refer to the instruction guide provided with the cartridges or contact HP customer support for assistance.
Add New Comment