User Manual Q&AAnswer
Jan 29, 2025 - 10:32 PM
To clean the filter on your Dirt Devil SD20000RED Simpli-Stik Vacuum Cleaner, follow these steps:
1. Unplug the vacuum cleaner from the electrical outlet.
2. Locate the dirt cup release button and depress it to remove the dirt cup from the unit.
3. Hold the dirt cup over a wastebasket and gently pull out the filter.
4. Shake off any excess dirt and debris from the dirt cup.
5. Use a brush to remove dust and dirt from the filter, or shake the filter inside the wastebasket to dislodge any trapped particles.
6. Important: Do not wash the filter. Washing the filter may damage it and reduce its effectiveness.
7. Gently push the filter back into the dirt cup.
8. Align the bottom of the dirt cup with the nozzle opening and rotate the nozzle up until it snaps into place.
9. Your filter is now clean and ready to use.
It is recommended to clean the filter after each use or after large pickups when the unit becomes full. Additionally, for optimal performance, it is advised to replace the filter every 6 months. If you need to purchase a replacement filter (F25), you can visit the Dirt Devil website at www.dirtdevil.com or contact customer service at 1-800-321-1134.
Add New Comment