User Manual Q&AAnswer
Jan 29, 2025 - 10:24 PM
To connect the bionik BNK-9027 PS4 Controller Power Stand to your PS4, please follow these steps:
1. Remove all contents from the box.
2. Gently connect the base to the dock by aligning the top tab located at the front of the dock to the recessed notch of the base.
3. Rotate the base downward and carefully push the base into the two tabs located on each side of the dock until the base snaps into place. Make sure the tab and recessed notch are properly aligned to avoid using force.
4. Plug the included power adapter into a wall outlet and thread the cable through the outing tab on the base. Attach the other end of the cable into the Micro-USB port on the bottom of the dock.
Once connected, you can proceed to connect your DUALSHOCK®4 controllers to the Power Stand for charging.
Note: For more detailed instructions and illustrations, please refer to the user guide provided with the product or download it from the bionik gaming website at www.bionikgaming.com.
If you encounter any difficulties during the installation process, please ensure that the base and dock are properly aligned and that the controller is properly seated in the charging dock. If you continue to experience issues, please contact customer support for assistance.
Add New Comment