User Manual Q&AAnswer
Jan 29, 2025 - 10:23 PM
To set the room at a specific temperature on the Lasko 751320 Oscillating Ceramic Tower Space Heater, follow these steps:
1. Make sure the heater is plugged into a 120-volt outlet and turned on.
2. Press the Temperature Button on the control panel to enter the temperature setting mode.
3. Use the Temperature Button to adjust the desired temperature. The available temperature settings will be indicated by lights on the control panel.
4. The light under the chosen temperature will continue to blink until the room reaches the desired temperature.
5. The heater will cycle off and on to maintain the room temperature. When set on MAX, the heater will run continuously.
Note: The automatic temperature function will only operate on "High" heat. You cannot set the temperature automatically when the unit is in low heat mode.
Please refer to the operating manual for more information and safety instructions.
Add New Comment