User Manual Q&AAnswer
Jan 29, 2025 - 10:10 PM
Sure! Here's a step-by-step guide on how to install the HP CR259FN Original HP 61 Black/Tri-color Ink cartridges in your printer:
1. Make sure your printer is turned on.
2. Open the cartridge access door. The carriage will move to the center of the printer. Wait until the carriage is idle and silent before proceeding.
3. Press down on the cartridge you want to replace to release it, and then pull the cartridge out to remove it from its slot. Be careful not to touch the copper-colored contacts or the ink nozzles.
4. Remove any clear protective tape that may be on the nozzles of the new cartridge.
5. Hold the new cartridge by its sides with the nozzles facing the printer, and then insert the cartridge into its corresponding slot. Make sure the icon on the cartridge matches the icon on the slot.
6. Push the cartridge forward into its slot until it snaps into place.
7. Repeat steps 3-6 for the other cartridge, if necessary.
8. Close the cartridge access door.
9. Try printing a test page to ensure the cartridges are installed correctly.
Please note that these instructions are a general guide, and the specific steps may vary depending on your printer model. For more detailed instructions, you can refer to the instruction guide that came with your HP CR259FN Original HP 61 Black/Tri-color Ink cartridges or consult the printer's user manual.
Add New Comment