User Manual Q&AAnswer
Jan 29, 2025 - 09:30 PM
To set the time on the iHome HW5 Staff, follow these steps:
1. Connect the universal voltage AC adaptor to the DC jack on the bottom panel of the unit and plug it into a wall outlet.
2. Remove the plastic protective film from the clock display.
3. Press and hold the time zone button located on the bottom of the unit. The default EASTERN time zone will flash in the bottom of the display.
4. Press the - or + button as needed until your time zone is displayed. The time display will also change according to the zone selected.
5. Once the correct time zone is set, press and hold the time set button on the bottom of the unit to enter clock setting mode. The time will flash and "SET" will appear on the display.
6. Press the - or + button to adjust the time (hold for rapid adjust). Make sure to set the correct AM or PM time. The PM symbol will appear on the clock display. There is no AM symbol.
7. Press the time set button to confirm the time. The year will flash.
8. Press the - or + button to set the date (hold for rapid adjust).
9. Press the time set button to confirm the year. The date will flash.
10. Press the - or + button to set the date (hold for rapid adjust).
11. Press the time set button. Two beeps will confirm that the clock setting is complete.
Note: Make sure that the Year, Month, and Date settings are correct so that the Auto Daylight Savings Time adjustments will occur on time.
For more detailed instructions and additional information, please refer to the iHome HW5 Staff User Guide.
Add New Comment