User Manual Q&AAnswer
Jan 29, 2025 - 09:25 PM
To charge the Ubiolabs OPL103E Road Hazard Lights, follow these steps:
1. Open the charging case to access the lights and charging ports.
2. Align each light with the port and gently press it into place. The white lights will blink to indicate the current battery capacity.
3. If using the wall adapter, connect the AC adapter to the input at the back of the case, then connect the wall adapter to an outlet.
4. If using the car adapter, connect the AC adapter to the input at the back of the case, then connect the car adapter to an outlet in the vehicle.
5. When the hazard lights are fully charged, the lights will remain on until the USB-C cable is removed.
6. Close the case, ensuring it is zipped shut.
It is important to note that for optimal battery performance, it is recommended to fully charge the power bank before use or storage. The lights come with a 1-year limited warranty from the date of purchase. If you have any further questions or issues, you can contact Ubio Labs customer service at support@ubiolabs.com or call 1-866-642-4428 (Monday - Friday 9 am - 4:30 pm PST).
Add New Comment