User Manual Q&AAnswer
Jan 29, 2025 - 09:15 PM
To mount the DAP WMS4T-B Passive wall speaker, follow these steps:
1. Drill mounting holes on the wall at the desired location.
2. Connect the amplifier and daisy-chain the WMS speakers.
3. Install the mounting plate on the wall.
4. Set the correct line transformer tap.
5. Install the speaker on the mounting plate.
6. Adjust the angle of the device.
7. Adjust the orientation of the logo.
8. Connect the amplifier to the power supply and switch it on.
For detailed instructions and illustrations, refer to the "Installation and Setup" section of the user manual, specifically the subsections "Drilling Mounting Holes," "Connecting Devices," "Installing the Mounting Plate," "Setting Line Transformer Taps," "Installing the Speaker," "Adjusting the Angle," and "Adjusting the Logo."
Please note that these instructions are a summary and it is important to refer to the complete user manual for full details and safety instructions.
Add New Comment