User Manual Q&AAnswer
Jan 29, 2025 - 09:10 PM
To select the range and set the output voltage on the Time Electronics 1006 Portable DC Millivolt Source, follow these steps:
1. Power on the unit.
2. Check the battery level indicator on the top of the unit. Green indicates that the batteries are ready for use, while red indicates that the batteries need to be changed or recharged.
3. Select the desired range using the push button. The 1006 offers three ranges: 0 to 999.9mV (0.1 mV steps), 0 to 99.99mV (10 µV steps), and 0 to 9.999mV (1 µV steps).
4. Dial the desired output voltage using the thumbwheel switches. The output voltage can be adjusted within the selected range.
5. The output voltage polarity can be selected using the front panel switch. The "off" position on the 1006 disconnects the output and provides a short circuit on the output terminals.
Please refer to the Time Electronics 1006 Portable DC Millivolt Source User Manual for more detailed instructions and safety precautions.
Add New Comment