User Manual Q&AAnswer
Jan 29, 2025 - 08:48 PM
To adjust the cutting depth on the Milwaukee SCS 65 Q Circular Saw, follow these steps:
1. First, determine the thickness of the workpiece you will be cutting.
2. Adjust the cutting depth by loosening the depth adjustment lever or xxxx on the saw.
3. Slide the base plate up or down to the desired cutting depth. Less than a full tooth of the blade teeth should be visible below the workpiece.
4. Once you have set the desired cutting depth, tighten the depth adjustment lever or xxxx to secure the base plate in place.
5. Before making any cuts, it is recommended to carry out a test cut to ensure the cutting depth is set correctly.
Please refer to the instruction manual for more detailed information and illustrations on adjusting the cutting depth of the Milwaukee SCS 65 Q Circular Saw.
Add New Comment