User Manual Q&AAnswer
Jan 29, 2025 - 08:42 PM
To inflate the under-seat protection of the OZONE BV1 Paraglide harness, follow these steps:
1. Open the rear pocket of the harness to access the inflation pipe.
2. Ensure that the stopper on the inflation pipe is in the open position.
3. Attach the inflation pipe to the outlet of the special stuff sack provided.
4. Close off the top of the stuff sack by rolling it tightly in your hands to trap the air inside.
5. Push or squeeze the stuff sack to transfer the air into the under-seat protection. You may need to repeat this process until the protection is fully inflated.
6. Once the protection is fully inflated, close the stopper on the inflation pipe.
7. Ensure that the under-seat pocket containing the protection is fully and completely closed with the zip located neatly in the red retainer. This is important for the safety and impact absorption of the harness.
It is crucial to ensure that the inflation pipe stopper and the under-seat zip are fully closed to ensure proper functioning of the under-seat protection.
Add New Comment