User Manual Q&AAnswer
Jan 29, 2025 - 05:50 AM
To mount the Aladdin FABRIC-LITE 20 Full Kit, follow these steps:
1. Attach the metal ring provided to the panel. This ring can be attached to magnets for mounting purposes.
2. Use the Velcro included in the kit to secure the panel in place.
3. Connect the panel connector plug to your dimmer unit. If needed, use the extension provided.
4. Plug your dimmer unit into a power outlet. Alternatively, you can use the integrated V-Mount or Gold-Mount plate on top of the dimmer and power it with batteries from 12-30V DC. Make sure the batteries can handle the power draw of 200 watts from the panel.
For more detailed instructions and visuals, you can refer to the user manual or watch instructional videos on the Aladdin Lights website or YouTube.
Note: Avoid using the dimmer wire or extension wire to hang or mount the panel. Do not bend or fold the panel more than 90 degrees, and do not tape directly on the LEDs as it can damage them.
Add New Comment