User Manual Q&AAnswer
Jan 29, 2025 - 05:49 AM
To assemble the , follow these steps:
1. Place the machine body on a flat and stable surface.
2. Remove the clip and pin on the drill drive shaft.
3. Install the auger and align the holes to connect the shaft and auger together.
4. Put the pin back in place and refit the clip through the hole in the pin.
Please refer to Figure 1 in the instruction manual for visual guidance on the assembly process.
Note: It is important to check the machine for any damage or malfunction before use. If you encounter any problems, do not use the machine and have it inspected and repaired by a qualified service technician.
Add New Comment