User Manual Q&AAnswer
Jan 29, 2025 - 05:41 AM
To use the IDAODAN FJY0001USP Electric Balloon Blower, please follow these steps:
1. Plug in the balloon blower to a power outlet with the appropriate voltage (110-120V).
2. Set the power switch to the "off" position.
3. Select the appropriate operating mode for your balloons. The balloon blower has two modes: automatic and semi-automatic.
- Automatic Mode: This mode is suitable for quick inflation. Press the nozzle to inflate the balloons, and inflation will stop when you release the pressure.
- Semi-Automatic Mode: This mode is recommended if the automatic mode is too quick and may cause balloons to burst. Press the nozzle to inflate the balloons, and when you stop pressing, inflation will also stop.
4. To inflate a balloon, pinch the balloon's mouth on two sides with your fingers.
5. Seal the inflation port of the balloon with the balloon's mouth.
6. Push the inflation port down to start filling the balloon with air.
7. When the balloon reaches the desired size, open the inflation port to stop the inflation process.
8. Repeat these steps for each balloon you want to inflate.
Please note that the IDAODAN FJY0001USP Electric Balloon Blower is designed to fill balloons with air, not helium or hydrogen. It is suitable for inflating latex and decorative balloons.
For more detailed instructions and safety information, please refer to the user manual provided with the product.7
Add New Comment