User Manual Q&AAnswer
Jan 29, 2025 - 05:38 AM
To install the WALI 1343LKS Full-Motion TV Wall Mount on a wood stud wall, follow these steps:
1. Twist the xxxx on the mount to release the xxxx and washer.
2. Use a bubble level and pencil to mark the position on the wall where you want to install the mount.
3. Drill 3/16" (4.5mm) diameter x 2.2" (55mm) length holes at the marked position on the wood stud.
4. Attach the mount to the wood stud using Bolt W-A and tighten it with a screwdriver.
5. Fix the Décor Cover C onto the front of the mount part.
6. Twist the xxxx on the VESA Plate B to open the arm and ensure the arm is vertical.
7. Select the appropriate TV screws and spacers (if needed) for your TV/Monitor.
8. Connect VESA Plate B together with D5 Washer M-E into the mounting holes on the back of the TV/Monitor and tighten with a screwdriver.
9. Connect the VESA Plate B with the Adapter D and Adapter E using Bolt F and Nut G, and tighten with a wrench and screwdriver.
10. Adjust the arm to be away from the wall by twisting the knobs.
11. Place the assembled TV/Monitor onto Arm A and tighten the VESA Plate B with the xxxx .
12. Tighten the whole arm with the bottom xxxx .
13. Fully tighten all knobs using Allen Key I each time after adjusting the preferred angle and extension.
14. Guide the cable through the clip holder on the arm.
15. Perform any necessary angle adjustments.
Please note that these instructions are a summary of the installation process. For more detailed instructions and illustrations, please refer to the WALI 1343LKS Full-Motion TV Wall Mount Installation Guide provided with the product.
Add New Comment