User Manual Q&AAnswer
Jan 29, 2025 - 04:51 AM
To assemble the Sealey SA660 Air Needle Scaler Composite Pistol Type, follow these steps:
1. xxxx the scaling head fully onto the body as indicated in Figure 1 of the manual.
2. Ensure the air supply is clean and does not exceed 90psi while operating the needle scaler.
3. Connect the needle scaler to the air supply by following the recommended hook-up procedure shown in Figure 2 of the manual.
4. Make sure the trigger of the needle scaler is not depressed before connecting it to the air supply.
5. Once the needle scaler is connected to the air supply, you can start it by depressing the trigger. However, avoid allowing the needle scaler to free run for an extended period of time as this can shorten its life.
Please note that it is important to read and understand the safety instructions provided in Section 1 of the manual before using the needle scaler. Additionally, always disconnect the needle scaler from the air supply before servicing or performing maintenance.
Add New Comment