User Manual Q&AAnswer
Jan 29, 2025 - 04:48 AM
To assemble the Deyi 9009-B US122 Office Chair, you will need the following tools:
- Allen wrench (included in the package)
- Phillips screwdriver (not included)
Please follow these installation instructions:
1. Start by unpacking all the components and lay them out on a flat surface.
2. Attach the backrest to the seat by aligning the holes on the backrest bracket with the holes on the seat bracket. Insert the provided screws and tighten them using the Allen wrench.
3. Attach the armrests to the seat by aligning the holes on the armrest brackets with the holes on the seat brackets. Insert the provided screws and tighten them using the Allen wrench.
4. Attach the gas lift cylinder to the seat mechanism. Insert the cylinder into the center hole on the seat mechanism and push it down until it locks into place.
5. Attach the five-star base to the gas lift cylinder. Align the holes on the base with the holes on the cylinder and insert the provided screws. Use a Phillips screwdriver to tighten the screws.
6. Finally, attach the casters to the base. Insert each caster into the holes on the base and push down until they click into place.
Your Deyi 9009-B US122 Office Chair is now fully assembled and ready for use. Please refer to the instruction manual for any additional information or troubleshooting tips.
Add New Comment