User Manual Q&AAnswer
Jan 29, 2025 - 04:47 AM
Cleaning the filters of the Proscenic A8 Air Purifier is essential for maintaining its performance. Here is a step-by-step guide on how to clean the filters:
1. Turn off the air purifier and unplug it from the power source.
2. Open the front cover of the air purifier by pulling it gently towards you.
3. Take out the pre-filter by pulling it upwards.
4. Remove the HEPA filter by pulling the tab located on the top of the filter.
5. Use a soft brush or vacuum cleaner with a brush attachment to remove dust and debris from the pre-filter and HEPA filter. Be gentle to avoid damaging the filters.
6. If the filters are heavily soiled, you can rinse them with clean water. However, do not use hot water or any cleaning agents.
7. Allow the filters to air dry completely before reinstalling them.
8. Once the filters are dry, place the HEPA filter back into the air purifier by aligning the tabs on the filter with the slots in the air purifier.
9. Insert the pre-filter back into the air purifier by aligning the tabs on the filter with the slots in the air purifier.
10. Close the front cover of the air purifier until it clicks into place.
11. Plug in the air purifier and turn it on.
It is recommended to clean the filters every 3-6 months, depending on the air quality and usage. The air purifier's control panel will display a filter replacement indicator when it is time to replace the filters entirely.
For more detailed instructions and illustrations, please refer to the Proscenic A8 Air Purifier Owner's Manual, specifically the "Cleaning and Maintenance" section.
Add New Comment