User Manual Q&AAnswer
Jan 29, 2025 - 04:41 AM
To change the battery in the ENDON 96933 Ebro Wall photocell & PIR, follow these steps:
1. Ensure that the product is turned off by pressing and holding the switch for 3 seconds until it turns off.
2. Locate the battery compartment on the product. It is not specified in the manual, but it is likely to be on the back or bottom of the unit.
3. Open the battery compartment by following the instructions provided in the manual or by using a screwdriver or other appropriate tool.
4. Remove the old battery from the compartment, taking note of its type and specifications.
5. Obtain a new battery of the same type and specifications as the old one. It is important to use the correct battery to ensure proper functioning of the product.
6. Insert the new battery into the compartment, making sure to align it correctly according to the polarity markings.
7. Close the battery compartment securely, following the instructions provided in the manual or by using the appropriate tool.
8. Test the product to ensure that the new battery is working properly by turning it on and checking its functionality.
Note: If you are unsure about changing the battery or have any concerns, it is recommended to consult a qualified electrician for assistance.
Add New Comment