User Manual Q&AAnswer
Jan 29, 2025 - 04:31 AM
To install the TOTO MS604114 SanaGloss UltraMax II Toilet, follow these steps:
1. Clean any debris out of the closet flange and install the mounting bolts into the slots of the flange.
2. Turn the toilet upside down and press a new wax seal onto the circular recess around the outlet opening. Turn the toilet upright and lower it into position over the closet flange and bolts. Press down firmly on both sides of the toilet rim to seat the wax seal.
3. Insert the cap base, washer, and thread nuts onto the bolts and hand tighten. Then tighten the bolts an additional ½ turn. Install the bolt caps.
4. Flush water through the flexible supply prior to connection at the ballcock/fill valve. Connect the flexible supply to the ballcock/fill valve shank using a flexible chrome-copper tube connector or equivalent.
5. Flush the toilet several times to check the flapper valve for proper operation.
6. Install the toilet tank lid onto the toilet tank top.
7. Install the toilet seat onto the toilet bowl using the top mount bolt set included with the bowl.
8. Replace the existing seat if necessary. Place the seat on the bowl and rotate the hinge unit into place while holding the seat down on the bowl. Fasten and tighten the bolt from the top with a screwdriver. Replace the bolt cap and the lower lid if necessary.
Please refer to the TOTO MS604114 SanaGloss UltraMax II Toilet Instruction Manual for more detailed instructions and illustrations.
Add New Comment