User Manual Q&AAnswer
Jan 29, 2025 - 04:28 AM
To adjust the distance between the blades on the Metabo SCV 18 LTX BL 1.6 Cordless Metal Shears, follow these steps:
1. Tap the on/off switch several times until the top blade has reached the lower dead center.
2. Remove the battery pack from the machine.
3. Loosen the bottom blade using the provided Allen key.
4. Set the blade distance with the adjustment xxxx using the enclosed Allen key to the required distance.
5. Retighten the blade.
6. Lightly tighten the adjustment xxxx using the enclosed Allen key.
7. Check the distance between the blades using the feeler gauge provided.
It is important to ensure that the blades are properly adjusted for optimal cutting results. The blade distance should match the sheet thickness you are working with. Remember to always follow the safety instructions and wear protective gear when using the machine.
Add New Comment