How do I install the BLOSSOM V8018 Jena 30 Inch Vanity Light Gray? (BLOSSOM V8018 Jena 30 Inch Light Gray Installation Guide)

Answer

manuals.plus

Jan 29, 2025 - 04:15 AM

To install the BLOSSOM V8018 Jena 30 Inch Vanity Light Gray, please follow the steps outlined in the installation guide provided with the product. Here is a summary of the installation process:

1. Cabinet positioning and installation:
- The suggested height of the vanity installation is 32-3/4” (831mm) - not including the basin.
- The height of Leveling Bracket Installation is 26-1/2” (671mm).
- Reserve power around 21-5/8” (550mm) off the ground.

2. Leveling bracket installation & Wiring:
- Before wiring the vanity, make sure to shut off the power.
- Follow the important safety instructions provided in the manual.
- Connect the furnishing to a properly grounded circuit.
- An electrical option cabinet must be wired to a 20 Amp GFI (Ground Fault Interrupter) Protected circuit when used in bathrooms and other required locations.

3. Hang the cabinet on the leveling bracket and adjust it horizontally:
- Place the vanity on the leveling bracket.
- Note that leveling brackets are only for leveling the vanity and not for permanent support. The vanity needs to be secured into the wood backing material.

4. Fixed Cabinet Install Lag Bolt:
- Determine the height, left, and right position of the vanity.
- Fix the vanity in place using lag bolts.

5. Install sink top with Silicone:
- Use silicone to install the sink top securely.

6. Finish:
- Follow any additional steps or instructions provided in the manual to complete the installation.

Please refer to the complete installation guide provided by Blossom Kitchen & Bath Supply Corporation for more detailed instructions and illustrations. If you have any further questions or need clarification, you can contact Blossom directly at (718)-366-0088 or sales@BlossomUS.com.