User Manual Q&AAnswer
Jan 29, 2025 - 03:51 AM
To connect your laptop to the NEC NP-M403H USB HDMI Projector, follow these steps:
1. Make sure your laptop and the projector are both powered off.
2. Locate the HDMI input port on the projector. It is usually labeled as "HDMI IN" and is located on the back or side panel of the projector.
3. Connect one end of the HDMI cable to the HDMI output port on your laptop.
4. Connect the other end of the HDMI cable to the HDMI input port on the projector.
5. Power on your laptop and the projector.
6. On your laptop, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to extend or duplicate your laptop's display to the projector. The exact wording may vary depending on your operating system.
8. Adjust the projector's focus and keystone settings if necessary.
9. You should now see your laptop's display on the projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the NEC NP-M403H USB HDMI Projector.
Add New Comment