User Manual Q&AAnswer
Jan 29, 2025 - 03:40 AM
To connect your Acer H5385BDi NSI Lumen projector to your device, follow these steps:
1. Ensure that your projector and device are both powered off.
2. Locate the HDMI or VGA port on your device and the corresponding port on the projector.
3. Connect one end of the HDMI or VGA cable to the port on your device and the other end to the corresponding port on the projector.
4. If you are using an HDMI cable, make sure to connect the audio cable from your device to the projector's audio input port if you want to use the projector's built-in speakers.
5. Once the cables are securely connected, power on your device and then power on the projector.
6. Use the projector's remote control or the control buttons on the projector itself to select the appropriate input source. For example, if you connected your device using HDMI, select the HDMI input source.
7. Your device's screen should now be displayed on the projector. Adjust the focus and other settings as needed using the projector's controls.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Acer H5385BDi NSI Lumen projector.
Add New Comment