User Manual Q&AAnswer
Jan 29, 2025 - 03:34 AM
To connect your device to the BenQ MP724 projector, follow these steps:
1. Check the available ports on both your device and the projector. The BenQ MP724 projector supports various input ports, including VGA, HDMI, S-Video, and composite video.
2. Choose the appropriate cable for your device and the available ports. For example, if your device has an HDMI output, use an HDMI cable. If your device has a VGA output, use a VGA cable.
3. Connect one end of the cable to the corresponding output port on your device and the other end to the corresponding input port on the projector. Make sure the connections are secure.
4. Turn on your device and the BenQ MP724 projector.
5. On the projector's remote control, press the "Source" button to select the input source that matches the port you connected your device to (e.g., HDMI, VGA, etc.). You can also use the "Source" button on the projector itself.
6. If necessary, adjust the projector's settings to optimize the display. Refer to the user manual for instructions on adjusting settings such as brightness, contrast, and aspect ratio.
7. Once everything is connected and set up correctly, you should see the content from your device displayed on the projector screen.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the BenQ MP724 projector.
Add New Comment