User Manual Q&AAnswer
Jan 29, 2025 - 03:07 AM
To install the SHADA 1000665 LEDs Light Wall Luminaires, please follow the instructions provided in the manual. Here is a step-by-step guide:
1. Before starting the installation, make sure you have read and understood the safety warnings mentioned in the manual.
2. Ensure that the power source is disconnected before proceeding with the installation.
3. Carefully examine the product and check for any damage or defects. If you find any, do not use the product and replace it immediately.
4. If the installation requires a non-standard consumer (power) installation, it is recommended to have a qualified technician perform the installation to reduce the risk of electric shock.
5. Determine the location where you want to install the wall luminaires. Ensure it is suitable for indoor and/or outdoor use, as mentioned in the product/parts or manual.
6. Once you have chosen the installation location, follow the provided installation/wire diagram (if applicable) to connect the product correctly.
7. Make sure the product is sufficiently ventilated during use. Do not cover the electrical (LED) device during usage, as it can generate heat and cause damage.
8. After the installation is complete, reconnect the power source and test the product to ensure it is functioning correctly.
Remember to keep the manual for future reference and only use the product as described in the manual. If you encounter any problems, disconnect the product from the power source and seek further assistance from the manufacturer's support team by visiting their website at www.shada.nl/nl/contact.
Please note that this answer is based on the information provided in the manual for the SHADA 1000665 LEDs Light Wall Luminaires.
Add New Comment